CASCADE 4-PERSON LUXURY INDOOR SAUNA
The Cascade was designed with elegance, performance, and efficiency in mind. The combination of western hemlock and rustic red cedar give this sauna an unique look and feel. The sauna includes a slatted, sturdy floor that will stay put as you walk around the room. The wide, multi-level benches can accommodate you and three other people as you experience a luxurious traditional sauna.
Please note: The Himalayan salt bar has also been replaced by the LED Mood Light as the backdrop lighting choice.
The Harvia Virta 9kW deluxe electric heater includes a separate digital control pad, which you can mount on the exterior of the sauna. The control pad allows you to dictate when you want the sauna to heat up with delay functions, as well as how hot you would like the room to get—up to 180ºF. The stone wall mounted behind the heater radiates the heat out into the room. Experience luxury and relaxation with the Cascade indoor sauna.
-
Tongue-and-groove lumber sections: 1-3/8” finished thickness
Pre-assembled wall and roof sections
Rustic western red cedar construction
Extra height interior for added headspace
Multi-level benches for height/heat variation
Wall-to-wall floor sections built of 1×2” slatted western hemlock lumber
Tempered glass door with long stainless handle on the outside, wooden on the inside
Stainless steel hinges, heater, and fasteners
Deluxe stainless steel bucket, ladle, and thermometer/hygrometer kit
Backrest with LED lighting, 110V plug-in
2 full-length benches, multi-level seating
Vertical slat 2×4” benches built of western hemlock timbers
Stone accent wall behind heater to radiate heat
Standard 9kW Virta deluxe sauna heater by Harvia, Finland for maximum power and fast heat-up time
Digital heater control; can be mounted on the interior or exterior of sauna
Hand-crafted construction
Indoor usage
Easy assembly for two people
Manufactured in the USA
-
Capacity: Holds up to four people
Heater size: 9kW Virta deluxe heater with Xenio digital control center; interior or exterior mount
Heater electrical: 240V, 40-amp service for heater; 8/3 hardwire connect
LED light electrical: 110V plug-in
Exterior dimensions: 71”W x 71”D x 84.5”H
Interior dimensions: 66”W x 66”D x 80.5”H
Lower bench size dimensions: 66”L x 14”W x 22”H
Upper bench size dimensions: 66”L x 22”W x 36”H
Door size: 64”H x 24”W
Window size: 64”H x 25”H (x2)
Shipping dimensions: 74”L x 40”W x 49”H
Shipping weight: 925 lbs
Assembled weight: 800 lbs
Note: All dimensions are approximate
-
Current ETA: 4-6 weeks. Shipping lead time is subject to change.
The Cascade will ship via an LTL truck and will arrive curbside on a single pallet.
Shipping included except for extremely remote locations. Additional fees required for addresses that are outside of the contiguous United States.
-
Some basic handyman skills are helpful when assembling the sauna. The only additional equipment needed is a cordless drill. Two people can generally do the assembly in 6 hours or less. It is recommended that you review the assembly manual in advance to familiarize yourself with the process.
The Cascade uses the same manual as Rainelle.
-
Traditional saunas require very little upkeep. Simply wipe down the interior after each use and check for any dust or debris that you may have tracked in. Read more about long-term care and maintenance here.