SUTTON 2-PERSON INDOOR SAUNA
The Sutton is a stylish traditional steam sauna that is ideal for placement where space is limited. This 2-person sauna kit comes ready-to-assemble, with thick wall sections of Nordic Spruce. It features a long upper bench for either reclining on your own or sitting comfortably with one other person. The lower full length step is adjustable and can easily slide in and out from beneath the upper bench.
Is the Sutton sauna protected enough to store in a garage or under a covered lanai?
Our indoor saunas are made to be placed indoors, however with some modifications they can be suitable for outdoor use as long as you're not at too high of an elevation. Our indoor saunas do not come with flooring, so that is something to keep in mind as well. When you place an indoor sauna outdoors, we recommend a few different things: a heater upgrade, a door upgrade (on pertinent models), and having the unit in an area protected from elements.
-
Tongue-and-groove construction: 1-3/8” finished thickness
Horizontal and vertical wood elements
Stainless steel hinges, heater, and fasteners
Tempered and tinted full-glass door
Assemble with door and heater on right or left of the sauna
1 full-length bench
1 movable step
Partially pre-assembled panel construction
-
Capacity: 2 people
Indoor placement
Wood: High-grade heartwood spruce
High-grade stainless steel fasteners and hardware
Tongue-and-groove construction: 1-3/8” finished thickness
Heater: 4.5kW stainless steel water-over-rocks steam heater
Electrical: 240V, 30-amp service for the heater; 10/2 wire, hardwire connect
LED interior light; 110V plug-in
Heater guard
Movable lower step
Built-in vent with sliding cover, located near the bottom of the sauna room
1 full-length upper bench
Tempered full-glass door
Exterior dimensions: 57”W x 57”D x 80”H
Interior dimensions: 53.5”W x 32”D x 78”H
Lower step size: 53.5”L x 9”W
Upper bench size: 53.5”L x 24”W
Door size: 23.5”L x 75.5”H
Shipping size: 81″L x 45″W x 33″H
Assembled Weight: 500 lbs.
Shipping Weight: 645 lbs
Hand-crafted workmanship
-
Lumber Type: The Sutton is constructed using thick Nordic spruce pieces of lumber. This sturdy lumber is perfect for a free-standing sauna, and offers plenty of natural insulation.
Heater: You can upgrade the Sutton from the standard 4.5kW KIP heater to a 6kW KIP.
-
Current ETA: 2-3 weeks. Shipping lead time is subject to change.
The Sutton will ship via an LTL truck and will arrive curbside on a single pallet.
FREE shipping except for extremely remote locations. Additional fees required for addresses that are outside of the contiguous United States.
-
Mid-level handyman and assembly skills are recommended for this sauna. Minimal sawing or modifying certain components may be necessary during the assembly process. Two people can generally do the assembly in 6-8 hours. It is recommended that you review the installation manual in advance to familiarize yourself with the process.
-
Traditional saunas require very little upkeep. Simply wipe down the interior after each use and check for any dust or debris that you may have tracked in. Read more about long-term care and maintenance here.