HILLSBORO 2-PERSON INDOOR SAUNA
The Hillsboro is an elegant 2-person indoor sauna that is ideal for placement where space is limited. Horizontal and vertical sections of heartwood spruce combine to create a beautiful and healthful accent to your home. For added placement flexibility, this freestanding traditional sauna can be assembled with the door and heater on either the left or right hand sides of the sauna.
Heater and stones are essential to a traditional sauna experience. With the room at least heated to 160ºF, the traditional sauna can be enjoyed two ways. The first is called a dry sauna, which lacks any added moisture. The second is called a wet sauna, where you sprinkle water onto the heated stones to create a refreshing burst of steam and added humidity. Traditional indoor saunas use your existing floor, and the Hillsboro is no exception.
Will the 6kW Wall Heater be sufficient for my Hillsboro sauna?
The 6kW Wall Heater will allow your sauna to reach temperatures of 170-180 degrees within 45-60 minutes. Each sauna is paired with a standard heater and offers different heater upgrades specific to the sauna.
-
Tongue-and-groove construction: 1-3/8” finished thickness
Horizontal and vertical wood elements
Stainless steel hinges, heater, and fasteners
Tempered and tinted full-glass door
Tempered and tinted window
Assemble with door and heater on right or left of the sauna
1 full-length bench
1 moveable step
Partially pre-assembled panel construction
-
Capacity: 2 people
Indoor placement
Wood: High-grade heartwood Spruce
High-grade stainless steel fasteners and hardware
Tongue-and-groove construction: 1-3/8” finished thickness
Heater: 4.5kW stainless steel water-over-rocks steam heater
Heater Electrical: 240V, 30-amp service for the heater; 10/2 wire, hardwire connect
LED interior light; 110V plug-in
Heater guard
Movable lower step
Built-in vent with sliding cover, located near the bottom of the sauna room
Easy assembly for 2 individuals
Exterior dimensions: 63”W x 44”D x 80”H
Interior dimensions: 58”W x 39”D x 78”H
Bench size: 58”L x 24”W x 35”H
Step size: 21”L x 13”W x 18”H
Door size: 76”H x 23.5”W
Window size: 76”H x 8.5”W
Shipping dimensions: 81″L x 47″W x 35″H
Shipping weight: 725 lbs
Hand-crafted workmanship
-
Lumber Type: The Hillsboro is constructed using thick Nordic spruce pieces of lumber. This sturdy lumber is perfect for a free-standing sauna, and offers plenty of natural insulation.
Heater: You can upgrade the Hillsboro from the standard 4.5kW KIP heater to a 6kW KIP.
-
Current ETA: 2-3 weeks. Shipping lead time is subject to change.
The Hillsboro will ship via an LTL truck and will arrive curbside on a single pallet.
FREE shipping except for extremely remote locations. Additional fees required for addresses that are outside of the contiguous United States.
-
Mid-level handyman and assembly skills are recommended for this sauna. Minimal sawing or modifying certain components may be necessary during the assembly process. Two people can generally do the assembly in 6-8 hours. It is recommended that you review the installation manual in advance to familiarize yourself with the process.
-
Traditional saunas require very little upkeep. Simply wipe down the interior after each use and check for any dust or debris that you may have tracked in. Read more about long-term care and maintenance here.
